0Your Cart$0.00
Shopping Cart (0)
No products in the cart.

BMW 4 Series G26 430i xDrive COUPE Service Repair Manual and Electrical Diagrams

$50.00$50.00
In stock
SKU:
Categories:Manual PDF
Shipping By Link Download
Shipping By Link Download
Secure Private Information
Secure Private Information
Guarantee Secure Payment
Guarantee Secure Payment

Support Contact:

Admin@autoepcsoft.org

BMW 4 Series G26 430i xDrive COUPE Service Repair Manual and Electrical Diagrams

Size: 666 MB
Language: English
Machine: Automotive
Machine Model: BMW 4 Series G26 430i xDrive COUPE
Document: Electrical Diagrams, Service Manual, Repair Manual
Pages: 11364 Pages

The Bookmarks of BMW 4 Series G26 430i xDrive COUPE Service Repair Manual and Electrical Diagrams:
Repair Instructions
 00 Maintenance and general note
   00 Maintenance 
     BMW engine oil service without supplementary service
     BMW Quality Certification I
     BMW rapid inspection
     Driving on a race track
     Engine oil consumption measurement
     Engine oil service
     Free pre-delivery check
     Pre-delivery check of service and electromechanical holding brake for transport and
                       immobilisation periods of more than 6 weeks
     Pre-delivery check of service and parking brakes with transport and immobilisation
                       periods of 3-6 weeks
     Service - air filter element
     Service - brake fluid
     Service - front brakes
     Service - microfilter
     Service - rear brakes
     Service - spark plugs
     Service - vehicle check
     None
     Servicing particulate filter
     Standard scope of service
     Suspension block delivery inspection
     Vehicle care measures for inventory vehicles (new and used vehicles) as well as vehicles to be taken off the road that are in the hands of customers
     Work instruction for removing the protective film
   01 Safety information, note regarding the handling of the repair instructions 
     Information on using cleaning agent/paints (personal protection equipment)
     Instructions for desiccant insert replacement
     Notes on handling the high pressure cleaner
     Safety information for working on vehicles with automatic engine start-stop function (MSA)
     Symbols used and information in repair instructions
   02 Raise vehicle and tow away 
     Raising the vehicle using a vehicle lift
     Raising vehicle with trolley jack
   03 Tightening specifications 
     Microencapsulated screws
   04 12 V vehicle electrical system 
     Information on intelligent battery sensor (IBS)
     Notes on AGM battery
     Notes on handling optical fibres
     Notes on handling wiring harnesses and cables
   06 Vehicle-specific notes 
     Instructions for opening and part exchange in refrigerant circuit
     Instructions for replacement of air conditioning condensers and radiator/coolers
   07 Operating fluids 
     Instructions for handling R1234yf refrigerant
     Notes on the refrigerant (R134a, R1234yf) and refrigerant oil
     Safety information for handling refrigerant R1234yf
     Safety informations for handling tetrafluorethane refrigerant R134a
   10 Heating/air conditioning system 
     Instructions for desiccant insert replacement
     Instructions for handling R1234yf refrigerant
     Instructions for opening and part exchange in refrigerant circuit
     Instructions for replacement of air conditioning condensers and radiator/coolers
     Notes on the refrigerant (R134a, R1234yf) and refrigerant oil
     Safety information for handling refrigerant R1234yf
     Safety informations for handling tetrafluorethane refrigerant R134a
   11 General maintenance 
     Checking/topping up oil level in automatic transmission
     Checking/topping up the oil level in the transfer box
     Oil change in rear axle final drive incl. used oil disposal
     Oil change in the front axle transmission including used oil disposal
     Oil change in transfer box including used oil disposal
   12 Complete vehicle maintenance 
     None
 11 Engine
   00 Engine 
     Check compression of all cylinders
     Checking pressure loss on all cylinders 
     Engine identification
     Engine oil consumption measurement
     Equipment recoding special tool the transverse member for fixing the engine in the installation location
     Handling components after flood damage
     Overview of consumables (Electronic Parts Catalogue)
     Safety information for working on vehicles with automatic engine start-stop function (MSA)
     Start-up of the oil circuit
   12 Cylinder head with lid 
     Checking cylinder head for watertightness 
     Disassemble and assemble cylinder head 
     Remove and install/replace acoustic cover
     Removing and installing/sealing cylinder head cover
     Replace the cylinder head cover
   14 Case Covers 
     Removing and installing/renewing front engine acoustic cover
     Removing and installing/replacing the rear acoustic cover
   15 Crankcase ventilation 
     Measuring internal engine pressure
     Replace engine ventilation line
   28 Drive belt with tensioning and deflecting element 
     Replacing alternator drive belt tensioner
     Replacing drive belt for alternator
   31 Camshaft 
     None
     Notes on checking and adjusting the timing (B36, B37, B38, B46, B47, B48)
     Remove and install/replace chain tensioner piston
   34 Valves with springs 
     Removing and installing/replacing all valves 
     Replace all valve springs 
     Replacing all valve stem seals 
   36 Variable camshaft control 
     Removing and installing / replacing both actuators 
   37 Variable valve gear 
     Removing and installing/replacing servomotor for eccentric shaft
   40 Oil supply 
     Checking engine oil pressure
   61 Intake manifold 
     Leakage test for the intake system
   65 Charger with control 
     Remove and install or replace the blow-off valve
     Removing and installing/replacing adapter for exhaust turbocharger
     Replace electrical controller drive for wastegate 
   78 CO adjustment, oxygen sensor 
     Replace monitoring oxygen sensor 
     Replacing oxygen sensor 
   Engine 
     Equipment recoding special tool the transverse member for fixing the engine in the installation location
     Parking-residing-driving
 12 Engine electrical system
   00 Engine electrical system 
     Butt connector for repairing a plug connection
     Handling components after flood damage
     Information on removing, connecting and changing the battery
     Instructions for removal and replacement of control units
     Notes for disconnecting and connecting the vehicle battery
     Notes on handling wiring harnesses and cables
     Notes/information on start assistance (jump starting)
     Safety information for working on vehicles with automatic engine start-stop function (MSA)
     Safety information on handling hybrid cars
     Unlocking and disconnecting various plug connections in electrical and hybrid vehicles
   12 Ignition lead, spark plugs 
     Removing and installing/renewing all spark plugs
   13 Ignition coil 
     Replacing an ignition coil 
   14 Electronic Shift Units or Control Units 
     Encoding the control unit (DME/DDE)
     Programming the control unit (DME/DDE)
     Replace crankshaft sensor 
     Replacing knock sensor 
     Replacing the camshaft sensor of the exhaust camshaft 
     Replacing the camshaft sensor of the intake camshaft 
     Replacing the control unit of the Digital Motor Electronics 
   31 Alternator with Drive and Mounting Parts 
     Removing and installing/replacing alternator
   35 Electrical machines 
     Safety information on handling hybrid cars
     Unlocking and disconnecting various plug connections in electrical and hybrid vehicles
   36 Control of hybrid / E-drive 
     Safety information on handling hybrid cars
     Unlocking and disconnecting various plug connections in electrical and hybrid vehicles
   41 Starter motor with mounting 
     Handling components after flood damage
     Replacing the engagement solenoid switch
   42 Starter line 
     Removing and installing/replacing the positive battery cable, remote positive terminal
                       to alternator 
     Replacing safety battery terminal (SBK)
   51 Engine wiring harness 
     Remove and install / replace Module 2, sensor system engine wiring
     Replacing the wiring harness section for injectors and ignition coils
     Replacing wiring harness section for Valvetronic actuator
     Safety information on handling hybrid cars
   61 Oil pressure, oil temperature, oil level display 
     Removing and installing/replacing oil pressure switch
   63 Switches and relays 
     Replacing power distribution box 
   90 Control unit box 
     Remove and install/replace control unit box
   Engine electrical system 
     Parking-residing-driving
 13 Fuel preparation and control
   00 Fuel preparation, check 
     Safety information for working on vehicles with automatic engine start-stop function (MSA)
   31 Fuel pump with drive and line 
     Notes regarding the fuel pressure test (reference pressure: surrounding area)
     Removing and installing/replacing the fuel feed line
   51 Injection pump, control section, mixture control unit 
     Removing and installing high pressure pump
   53 Fuel Injector Nozzles and Lines 
     Clean the cylinder heads in the area of injectors to prevent sand/dust contamination.
     Remove and install all injectors in the injection system
     Remove and install high-pressure rail
     Replace pressure line 
     Replacing the high-pressure fuel sensor 
   54 Throttle valve and operation 
     Remove and install/seal throttle body
   62 Senders for Control Unit 
     Remove and install/replace hot film air mass meter 
     Replace charge air temperature sensor 
     Replacing the differential pressure sensor for the petrol particulate filter 
     Replacing the pressure sensor 
   71 Intake silencer 
     Remove and install intake silencer housing
     Removing and installing/replacing charge air line
     Removing and installing/replacing clean air pipe
   72 Air filter 
     Replacing air filter element
   90 Carbon canister ventilation 
     Replace the tank vent valve 
 16 Fuel supply
   00 Fuel supply 
     Draining and filling fuel tank
   12 Lines 
     Removing and installing or replacing carbon canister
     Replacing fuel feed line, front
     Replacing purge air line, front
   13 Crankcase ventilation, emission monitoring 
     None
   14 Delivery, preparation and content measurement, control units, electric fuel pump 
     Removing and installing/replacing control unit for the electric fuel pump 
     Removing and installing/replacing delivery unit 
     None
   Fuel supply 
     Information on using cleaning agent/paints (personal protection equipment)
 17 Cooling
   00 Cooling, check 
     Bleed the cooling system and check it for watertightness with the special tool
     Bleed the cooling system and check it for watertightness with the special tool 
     Check the cooling system for watertightness with the special tool 
     Instructions for working on cooling system
     Safety information for working on vehicles with automatic engine start-stop function (MSA)
   10 Radiator, expansion tank, lines 
     Instructions for replacement of air conditioning condensers and radiator/coolers
   11 Engine oil cooler and mounting parts 
     Instructions for replacement of air conditioning condensers and radiator/coolers
     Removing and installing/replacing coolant expansion tank for the low-temperature coolant
                       circuit
     Removing and installing/replacing fan cowl with electric fan
   12 Coolant lines 
     Overview of the coolant lines on the front electric drive unit
     Overview of the coolant lines on the rear electric drive unit
     Replacing the coolant hose between coolant radiator and heat management module 
     Replacing the coolant hose between coolant radiator at the top and coolant pump 
   21 Oil cooler 
     Instructions for replacement of air conditioning condensers and radiator/coolers
   51 Charge air cooler with mounting 
     Instructions for replacement of air conditioning condensers and radiator/coolers
   Cooling 
     Instructions for working on cooling system
 18 Exhaust system
   00 Exhaust system 
     Remove and install complete exhaust system 
   12 Silencer 
     Replacing front silencer
     Replacing the controller drive for exhaust flap
     Replacing the rear silencer
   32 Exhaust gas catalytic converter 
     Replacing the petrol particulate filter
 23 Manual gearbox
   00 Manual gearbox 
     Transmission designations
     Universal BMW transmission take-up
     Universal transmission retaining bridge
   Manual gearbox 
     Transmission designations
     Universal BMW transmission take-up
     Universal transmission retaining bridge
 24 Automatic transmission
   00 Automatic transmission 
     Transmission designations
     Universal BMW transmission take-up
     Universal transmission retaining bridge
 26 Propeller shaft
   00 Propeller shaft, general 
     Additional work on all-wheel drive vehicles after driving with faulty (non-engaging) drive
     Evaluation criteria for assessing flexible discs
   11 Single or multiple part propeller shaft 
     Replacing flexible disc for rear propeller shaft
 27 Transfer box
   00 Transfer box 
     Oil change in transfer box including used oil disposal
 31 Front axle, front suspension
   00 Front axle in general 
     Information on replacing shock absorbers
     Mobile table lift
     Notes on wheel bearing replacement following accident damage
     Raising the vehicle using a vehicle lift
     Safety information for working on vehicles with automatic engine start-stop function (MSA)
   10 Front Axle Suspension 
     Remove and install/replace the right crash wedge
     Removing and installing/replacing the left crash wedge
   11 Front axle support 
     Removing and installing/replacing stiffening plate
   12 Wishbones and struts including rubber mounts 
     Removing and installing/replacing left or right tension strut
     Replacing left or right wishbone 
   21 Wheel Bearings and Steering Knuckle 
     Replacing left / right swivel bearing 
     Replacing the front wheel bearing
   31 Spring Struts 
     Information on replacing shock absorbers
     Replacing front left or right spring strut shock absorber
   33 Spring with mounting 
     Removing and installing/replacing coil spring for front left or front right spring
                       strut
     Replacing front left or right spring strut support bearing
   35 Anti-roll bar 
     Removing and installing / replacing anti-roll bar link, left
     Removing and installing / replacing anti-roll bar link, right
   51 Front axle/sealing 
     Replacing radial shaft seal for output shaft, left
     Replacing radial shaft seal for output shaft, right
   60 Output shaft 
     Notes on removing and installing Low Profile band clamps
     Removing and installing/replacing left output shaft
     Removing and installing/replacing right output shaft
     Replacing a gaiter of the output shaft  
     None
   Front axle, front suspension 
     Microencapsulated screws
 32 Steering and Wheel Alignment
   00 Steering, measurement 
     Adjusting rear axle 
     Adjusting rear axle and renewing with eccentric screws
     Adjusting toe-in on front axle 
     Carry out Kinematics Diagnosis System wheel alignment with vehicle load up to design
                       position
     General chassis and suspension definitions
     General information and definitions
     KDS data statuses
     Kinematics Diagnosis System wheel alignment with ride height measurement without loading
                       the vehicle
     Notes on replacement of steering gear/steering column/steering shaft following accident damage
     Safety information for working on vehicles with automatic engine start-stop function (MSA)
     Troubleshooting chassis mechanics
   11 Mechanical steering gear 
     Notes on replacement of steering gear/steering column/steering shaft following accident damage
     Replacing gaiter for steering box on left or right 
   13 Steering gear with power steering unit 
     Notes on replacement of steering gear/steering column/steering shaft following accident damage
     None
   21 Steering column stalk, track rod, steering damper 
     Replacing left or right track rod 
     Replacing left or right track rod end 
   31 Steering column 
     Removing and installing / replacing lower section of steering shaft
     Removing and installing/replacing steering column shroud lower section
     Removing and installing/replacing steering column shroud upper section
     Replacing steering shaft collar
   33 Steering Wheel 
     Removing and installing the sports steering wheel
     Removing and installing/replacing the cover for the sports steering wheel
     Replacing the M Sport steering wheel
     Replacing the sports steering wheel
   34 Airbag and airbag steering wheel 
     Procedure after airbag deployment as result of an accident
     Removing and installing/replacing airbag unit
     Safety regulations for handling components with gas generators
   Steering and Wheel Alignment 
     Microencapsulated screws
 33 Rear axle, rear-wheel drive, guide
   00 Rear axle, rear-wheel drive, guide 
     Information on replacing shock absorbers
     Notes on wheel bearing replacement following accident damage
     Raising the vehicle using a vehicle lift
   10 Rear axle final drive 
     Removing and installing rear axle final drive
     Removing and installing the rear axle differential of M Sport differential
     Removing and installing the servomotor for the rear axle differential, right
     Removing and installing/replacing temperature sensor
     Replacing both radial shaft seals for the output shaft on the rear axle differential
     Replacing right rear axle differential servomotor 
     Replacing the radial shaft seal for the output shaft on the rear axle differential,
                       left or right
     Replacing the rear axle differential
     Replacing the rear axle differential M sport differential
   11 Transmission housing with lid 
     Replacing lid for rear axle differential
     Replacing radial shaft seal for input flange of rear axle differential
     Replacing rear cover gasket on rear axle final drive
     None
     Replacing the rear axle differential cover M sport differential
     Replacing the rear axle differential M sport differential cover gasket
   17 Rear axle differential mountings 
     Replacing all rubber mounts at front of rear axle final drive suspension
     Replacing the rubber mounts for the rear axle final drive suspension at rear
   21 Output Shaft 
     Removing and installing/replacing left output shaft
     Removing and installing/replacing right output shaft
   31 Rear axle support 
     Lowering/raising rear axle support
     Remove and install/replace the vibration absorber on the rear axle differential
     Removing and installing complete rear axle support
     Removing and installing/replacing the vibration absorber on the rear axle support
   32 Trailing arms and struts 
     Remove and install a steering stub / wheel carrier 
     Removing and installing/replacing left or right camber control arm 
     Removing and installing/replacing left or right camber control arm cover
     Removing and installing/replacing left or right track control arm 
     Replacing a steering stub / wheel carrier 
     Replacing left or right trailing arm
     Replacing one upper wishbone 
   33 Rear Axle Suspension 
     Replacing all rubber mounts for rear axle support
     Replacing left or right rear axle support compression strut
     Replacing rear left or right compression strut for rear axle support
   41 Wheel Bearings 
     Replacing left or right wheel bearing on rear axle shaft
   52 Shock Absorbers 
     Information on replacing shock absorbers
     Removing and installing rear left or right shock absorber
     Replacing rear left or right side shock absorber
     Replacing rear left or right support bearing for spring strut/shock absorber 
   53 Springs with suspension 
     Removing and installing / replacing rear left or right coil spring
   55 Anti-roll bar 
     Removing and installing/replacing rear anti-roll bar
     Replacing left or right anti-roll bar link
   Rear axle, rear-wheel drive, guide 
     Microencapsulated screws
 34 Brakes
   00 Braking, check, ventilation 
     Guideline for applying brake pad paste on brake pads and caliper carrier
     Perform brake test on test stand
     Replacing fluid in brake system
     Safety information for working on vehicles with automatic engine start-stop function (MSA)
     Troubleshooting the brake system if the brake pedal fails
   11 Front Wheel Brakes 
     Reconditioning front left or right brake caliper 
     Removing and installing/renewing brake pads on both front disc brakes
     Removing and installing/replacing both front brake discs
     Removing and installing/replacing left or right front brake caliper 
     Replacing front left or right caliper carrier/guard plate
   21 Rear Wheel Brakes: 
     Guideline for applying brake pad paste on brake pads and caliper carrier
     Remove and install/replace rear right protective plate
     Removing and installing/renewing both brake discs
     Removing and installing/replacing both rear brake pads of disc brake
     Removing and installing/replacing rear left protective plate
     Replacing rear right brake pad
   31 Foot and tandem brake master cylinder 
     Replacing brake fluid level switch
   32 Brake Lines 
     Replacing front left or right brake hose 
     Replacing rear left or right brake hose
   33 Brake servo 
     Troubleshooting the brake system if the brake pedal fails
   35 Electrical components / wear indicator 
     Replacing one brake pad wear sensor 
   41 Parking brake 
     EMF parking brake - use emergency release
     Replacing the control unit for parking brake 
   51 Mechanical hydraulic components 
     Removing and installing the hydraulic unit
     Replacing the hydraulic unit 
   52 Electronic components 
     None
     Removing and installing/replacing EMF actuator
     Replacing DSC control unit 
     None
   Brakes 
     Information on using cleaning agent/paints (personal protection equipment)
     Microencapsulated screws
 35 Pedals
   40 Accelerator pedal activation 
     Removing and installing or replacing accelerator pedal module
 36 Wheels with tyres
   10 Wheels 
     Notes and specifications for tyre / wheel exchange 
     Remove or install front or rear wheel
     Stationary wheel balancing
   11 Disc wheels (rims) 
     initialize Tyre Pressure Control
     None
   12 Tyres 
     Notes and specifications for tyre / wheel exchange 
     Replacing a tyre 
     Replacing a tyre with run-flat technology 
   Wheels with tyres 
     Notes and specifications for tyre / wheel exchange 
 37 Integrated Suspension Systems
   00 Integrated suspension system in general 
     Safety information for working on vehicles with automatic engine start-stop function (MSA)
   11 Control and suspension elements, front 
     Replacing front left or right spring strut 
   12 Control and suspension elements, rear 
     Carrying out ride height adjustment 
     Removing and installing rear left or right shock absorber 
     Replacing rear left or right side shock absorber 
   14 Electric components 
     Replacing front left or right vertical acceleration sensor 
     Replacing front ride height sensor 
     Replacing rear ride height sensor 
     None
 41 Body
   00 Body 
     0 Notes on the repair technique used in the main group 41
     Blind rivet
     BMW/MINI bonding instructions
     Checklist for front seat
     Corrosion protection
     EMC screws
     Filler S1
     Fix bolts on the new part
     General instructions on paintwork
     General notes for labelling with adhesive films
     Grinding aluminium components
     Grinding steel parts
     Handling airbags and restraint systems
     Handling components after flood damage
     Handling electrical system and electronics
     Information on hazards
     Information on metal filler
     Information on using cleaning agent/paints (personal protection equipment)
     Information on vehicle protection
     Information/warning labels
     Installation solution for straight shank/hexagon rivet nut
     Installing a cavity sealing with 2-component PU cavity foam
     Installing cavity sealing (expanded)
     Installing cavity sealing (not expanded)
     Materials science
     Notes on adhesive K1
     Notes on adhesive K2
     Notes on adhesive K3
     Notes on adhesive K4
     Notes on adhesive K5
     Notes on adhesive K6
     Notes on cleaning agent R1
     Notes on handling the high pressure cleaner
     Notes on the water drain hose of the slide/tilt sunroof
     Notes on using temperature-controlled infra-red radiators
     Opening bonded connections
     Opening brazed connections
     Opening rivet connections
     Opening welded connections
     Overview of additional work for the removal and installation or replacement of electronic components in the body area/windscreen
     Overview of consumables (Electronic Parts Catalogue)
     Overview of glue cartridge guns
     Punch rivets
     Quality standard
     Reinforcement plate with stud bolt (bonded or welded)
     Releasing bonded folded seam connections
     Repair methods, repair stages 1
     Repair solution for straight shank/hexagon rivet nut
     Repair techniques, repair stage 2
     Repair techniques, repair stage 3
     Repairing headlights
     Repairing plastic components
     Replacement parts standards
     Replacing blind rivets
     Safety at work
     Safety information for working on vehicles with automatic engine start-stop function (MSA)
     Safety instructions for handling magnets
     Separating cut determination with a template
     Setting blind rivet nuts and bolts
     Soldering steel components
     Spot-weld bonding steel components
     Spray gun for cavity sealant
     Straightening aluminium component on the outer skin
     Straightening aluminium components in structure
     Straightening steel components in the structure
     Straightening steel components on the outer skin
     Touching up paintwork damage
     Welding in reinforcement plate (sheet steel)
     Welding steel components
     Working with 2-component PU cavity foam
     Workshop equipment (BMW and MINI vehicles)
   11 Support 
     0 Notes on the repair technique used in the main group 41
     Completely replacing the left carrier support
     Replacing engine support in front of bulkhead, left 
     Replacing engine support with left wheel arch in front of bulkhead 
     Replacing entrance for door front left
   12 Floor panels 
     0 Notes on the repair technique used in the main group 41
     Replace luggage compartment floor, middle section 
     Replacing left luggage compartment base
     Replacing left luggage compartment base 
     Replacing the left luggage compartment floor and side member 
     Replacing the luggage compartment floor and right-hand side member 
     Replacing the rear luggage compartment floor 
     Replacing the right luggage compartment floor
     Replacing the right luggage compartment floor 
   13 Partition walls 
     Replacing the left engine bulkhead 
   14 Wheel arches 
     0 Notes on the repair technique used in the main group 41
     Replace rear outer wheel arch section with left reinforcement 
     Replace the rear left outer wheel arch section 
     Replace the rear right outer wheel arch section 
     Replacing engine support/front left side frame connection
     Replacing front left wheel arch 
     Replacing rear outer wheel arch section with right reinforcement 
   21 Side frames and pillars 
     0 Notes on the repair technique used in the main group 41
     Additional work - replacing the D-pillar on the left 
     Replace outer left B-pillar.
     Replacing A-pillar with reinforcement on left 
     Replacing B-pillar with reinforcement on left 
     Replacing left outer A-pillar
   22 Roof frame 
     0 Notes on the repair technique used in the main group 41
   31 Roof 
     0 Notes on the repair technique used in the main group 41
     Replace roof outer skin
     Replace roof outer skin with slide/tilt sunroof
   32 Front and rear window frame 
     0 Notes on the repair technique used in the main group 41
   33 Front trim panel 
     0 Notes on the repair technique used in the main group 41
     Replacing front left or right side wall holder
   34 Rear trim panel 
     0 Notes on the repair technique used in the main group 41
     Replacing outer tail panel section
     Replacing tail panel
   35 Side Panels 
     0 Notes on the repair technique used in the main group 41
     Reinforcement plate with stud bolt (bonded or welded)
     Replace a holder for the front side panel 
     Replace right front side panel
     Replace three holders for the front side panel 
     Replacing front left or right side wall holder
     Replacing left front side panel
     Replacing rear left side panel
     Replacing rear right side panel
   51 Front doors 
     Notes on replacing the door
     Removing and installing left or right front door
   52 Rear doors 
     Notes on replacing the door
     Removing and installing rear left or right door
   61 Engine compartment lid 
     Adjusting bonnet
     Removing and installing engine compartment lid
     Removing and installing engine compartment lid 
     Removing and installing/replacing the bonnet hinge, left
     Removing and installing/replacing the bonnet hinge, left 
     Removing and installing/replacing the bonnet hinge, right
     Removing and installing/replacing the bonnet hinge, right 
     Replacing the bonnet
     Replacing the bonnet 
   62 Tailgate 
     Removing and installing rear lid
     Removing and installing/replacing both tailgate hinges 
     Replacing the tailgate
   Body 
     0 Notes on the repair technique used in the main group 41
     Information on using cleaning agent/paints (personal protection equipment)
 51 Body equipment
   00 General body equipment 
     Fix bolts on the new part
     Notes on component bonding with adhesive tape
     Overview of additional work for the removal and installation or replacement of electronic components in the body area/windscreen
     Overview of consumables (Electronic Parts Catalogue)
     Replacing blind rivets
     Safety information for working on vehicles with automatic engine start-stop function (MSA)
     Safety instructions for working on cars with airbag systems
   11 Front Bumper 
     Remove and install front bumper panel
     Remove and install front bumper panel lower section
     Removing and installing ornamental grille in front bumper panel 
     Removing and installing/replacing support for front bumper panel
     Removing and installing/replacing support for front lower bumper panel
     Removing and installing/replacing trim on front bumper panel
     Replace bumper panel, front
     Replace front bumper panel lower section
     Replacing the number plate baseplate for the number plate
   12 Rear bumper 
     Overview of consumables (Electronic Parts Catalogue)
     Removing and installing rear bumper panel
     Removing and installing/replacing cover on rear bumper panel
     Removing and installing/replacing rear centre bumper guide 
     Removing and installing/replacing rear diffuser
     Removing and installing/replacing rear left or right bumper guide 
     Removing and installing/replacing support for rear bumper panel
     Replace rear bumper panel
     Replacing corner section of right bumper guide 
     Replacing the corner section of the left bumper guide 
   13 Trim Parts, Covers, Handle Strip 
     Remove and install cowl panel cover
     Remove and install/replace door pillar trim
     Removing and installing left or right roof trim strip
     Removing and installing or replacing trim strip on gutter strip at rear left or right
     Removing and installing or replacing trim strip on roof gutter at left or right
     Removing and installing/replacing front grill centre section
     Replacing wheel arch trim of the rear side panel, left or right 
   14 Badges, labels, adhesive strips 
     General notes for labelling with adhesive films
     Removing and installing/replacing rear BMW badge
     Replacing front BMW badge
     Replacing model name plate, rear
     Replacing the model inscription, rear
   16 Mirrors, Finishers, Ashtrays, Consoles 
     Remove and install the front storage compartment 
     Remove and install the rear centre console trim
     Remove and install/replace lock barrel for glove box
     Remove and install/replace the interior mirror
     Removing and installing center console trim
     Removing and installing complete centre console
     Removing and installing glove box lid
     Removing and installing or replacing front grab handle
     Removing and installing or replacing retaining ring on left or right exterior mirror
     Removing and installing or replacing sun visor and left or right counter support
     Removing and installing the centre armrest storage compartment
     Removing and installing the exterior mirror on left or right front door
     Removing and installing/replacing centre armrest
     Removing and installing/replacing cover cap on left or right exterior mirror
     Removing and installing/replacing damper for glove box
     Removing and installing/replacing decorative trim on centre console on left or right
     Removing and installing/replacing driver's side fold-down compartment
     Removing and installing/replacing front cup holder
     Removing and installing/replacing housing on left or right exterior mirror
     Removing and installing/replacing rear left/right grab handle
     Replace centre console trim to the rear inside
     Replace front storage compartment
     Replace the rear centre console trim
     Replacing centre console
     Replacing glove box lid
     Replacing mirror glass for exterior mirror
     Replacing storage compartment trim
     Replacing storage compartment trim 
     Replacing the exterior rearview mirror on the front door on the left or right
   21 Door locks, handles, fittings, front 
     Adjusting front left or right lock striker
     Remove and install/replace door stop of the front left or front right door
     Removing and installing/replacing Bowden cable for external door handle 
     Removing and installing/replacing Bowden cable for external front right door handle
                       
     Removing and installing/replacing the Bowden cable for the inside door opener on the
                       left or right front door
     Removing and installing/replacing the complete lock barrel on the left or right front
                       door
     Removing and installing/replacing the door lock of the driver's door
     Removing and installing/replacing the door lock of the front passenger door
     Removing and installing/replacing the inner door opener on the left or right front
                       door
     Removing and installing/replacing the outside door handle at the front left or right
     Removing and installing/replacing the outside door handle support including lock barrel,
                       left or right
     Removing and installing/replacing the outside door handle support without lock barrel,
                       left or right
     Removing and installing/replacing the weather strip on the inside of the front door
     Removing and installing/replacing the weather strip on the outside of the front door
                       
     Removing and installing/replacing weather strip on outside of front door
     Replacing front left or right lock striker
     Teach in radio remote control/radio remote control with display (BMW display key)
   22 Door locks, handles, fittings, rear 
     Adjusting rear left or right lock striker
     Remove and install/replace the door lock on the left or right rear doors
     Removing and installing/replacing the Bowden cable for the inside door opener on the
                       left or right rear door
     Removing and installing/replacing the Bowden cable for the outside door handle at
                       the rear left or right
     Removing and installing/replacing the door brake on the left or right rear door
     Removing and installing/replacing the inner door opener on the left or right rear
                       door
     Removing and installing/replacing the outside door handle at the rear left or right
     Removing and installing/replacing the outside door handle support in the left or right
                       rear door
     Removing and installing/replacing the weather strip on the inside of the rear door
     Removing and installing/replacing the weather strip on the outside left or right rear
                       door
     Replacing the rear left or right lock striker
   23 Bonnet catch, locks 
     Adjusting left or right striker on engine compartment lid
     Adjusting/replacing bump stops
     Adjusting/replacing stop pads
     Removing and installing/replacing Bowden cable for front bonnet locks
     Removing and installing/replacing left engine compartment lid lock
     Removing and installing/replacing left or right gas pressure spring for engine compartment
                       lid
     Removing and installing/replacing right engine compartment lid lock
     Removing and installing/replacing the left or right actuator
     Removing/installing ball sockets with clip
   24 Tailgate catch, locks 
     Adjusting rear lid lock
     Adjusting/replacing stop pads
     Removing and installing/replacing button for tailgate activation
     Removing and installing/replacing drive for Automatic Soft Close drive on tailgate
     Removing and installing/replacing left electrical spindle drive for tailgate
     Removing and installing/replacing right electrical spindle drive for tailgate
     Removing and installing/replacing striker for tailgate lock
     Removing/installing ball sockets with clip
   31 Front and rear window 
     General procedure for the disassembly and installation of bonded window glass
     Materials for bonding window

#More Product: BMW Service Repair Manual and Wiring Diagram 

Related products