Freightliner Cascadia 2022-2026 Gen5 Engine Workshop Manual
Data Size: 487.12 MB
File Type: PDF
Language: English
Manufacturer: Freightliner
Applicable Machine: Truck
Document: Workshop Manual
Machine Model: Freightliner Cascadia 2022-2026 Gen5 Engine
List Contents:
Detroit-DD15-Gen-5-Engine-Workshop-Manual-DDC-SVC-MAN-0215.pdf (1278 Pages):
1.1 California Proposition 65 Warning and Engine Idle Notice
1.2 Engine External Views
1.3 Engine Model and Serial Number
1.4 Engine Steam Clean - Enhanced
1.5 Engine Steam Clean - General
1.6 Engine Storage
1.7 General Cleaning and Gasket Preparation Guidelines
1.8 Restoring an Engine to Service After Extended Storage
1.9 Safety Precautions
2.1 Aftertreatment General Procedures
2.2 Aftertreatment System (ATS) Assembly
2.3 Diesel Particulate Filter (DPF)
2.4 Diesel Oxidation Catalyst (DOC)
2.5 Diesel Exhaust Fluid (DEF) Dosing Unit
2.6 Diesel Exhaust Fluid (DEF) Pump
2.7 Diesel Exhaust Fluid (DEF) Pump Filter
2.8 Diesel Exhaust Fluid (DEF) Service Kit
2.9 Hydrocarbon (HC) Fuel Doser Block
2.10 Hydrocarbon (HC) Fuel Doser Block Supply Line
2.11 Hydrocarbon (HC) Fuel Doser Injector Valve Assembly
2.12 Hydrocarbon (HC) Fuel Doser Injector Valve
2.13 Hydrocarbon (HC) Doser Coolant Supply Line
2.14 Hydrocarbon (HC) Doser Coolant Return Line
2.15 Hydrocarbon (HC) Fuel Doser Supply Line
3.1 Aftertreatment Electrical General Procedures
3.2 Aftertreatment Control Module (ACM)
3.3 Aftertreatment System (ATS) Wiring Harness
3.4 Aftertreatment System (ATS) Delta Pressure Sensor
3.5 Aftertreatment System (ATS) Delta Pressure Sensor Tubes
3.6 Diesel Oxidation Catalyst (DOC) Inlet Temperature Sensor
3.7 Diesel Oxidation Catalyst (DOC) Outlet Temperature Sensor
3.8 Diesel Particulate Filter (DPF) Outlet Temperature Sensor
3.9 Fuel Compensation Pressure Sensor
3.10 Selective Catalytic Reduction (SCR) Inlet NOx Sensor
3.11 Selective Catalytic Reduction (SCR) Outlet NOx Sensor
3.12 Selective Catalytic Reduction (SCR) Outlet Temperature Sensor
3.13 Soot Sensor
4.1 Air Compressor
4.2 Air Compressor Coolant Supply Line
4.3 Air Compressor Coolant Return Line
4.4 Unloader Valve
5.1 Air Intake Manifold
5.2 Cold Boost Pipe (Charge Air Pipe)
5.3 Intake Mixer Assembly
5.4 Intake Adaptor
5.5 Turbocharger
5.6 Turbocharger Oil Supply Line
5.7 Turbocharger Oil Return Line
6.1 Accessory Mounting Bracket
6.2 Belt Drive Tensioner System
6.3 Idler Pulley and Idler Pulley Bracket
6.4 Non-Bracketed Idler Pulley
6.5 Poly-V-Belts
7.1 Cooling System General Procedures
7.2 Coolant Requirements
7.3 Coolant Inlet Elbow
7.4 Coolant Thermostat
7.5 Fixed Speed Engine Water Pump
7.6 Fixed Speed Engine Water Pump Pulley
7.7 Variable Speed Engine Water Pump
8.1 Engine Mechanical General Procedures
8.2 Engine Replacement Procedures
8.3 Camshafts
8.4 Camshaft Housing
8.5 Crankshaft and Bearings
8.6 Crankshaft Oil Seals
8.7 Cylinder Block
8.8 Cylinder Block Cover Plate
8.9 Cylinder Head and Valves
8.10 Cylinder Liner
8.11 Engine Brakes
8.12 Flywheel Assembly
8.13 Flywheel Housing
8.14 Front Engine Cover
8.15 Gear Train
8.16 Pilot Bearing
8.17 Piston and Connecting Rod Assembly
8.18 Rocker Arms
8.19 Rocker Cover
8.20 Vibration Damper
9.1 Engine Sensor Locations
9.2 Engine Wiring Harness
9.3 Fuel Injector Wiring Harness
9.4 Motor Control Module (MCM)
9.5 Camshaft Position Sensor
9.6 Crankcase Breather Speed Sensor
9.7 Crankshaft Position Sensor
9.8 Delta Pressure Sensor
9.9 Engine Coolant Inlet Temperature Sensor
9.10 Engine Coolant Outlet Temperature Sensor
9.11 Engine Oil Pressure Sensor
9.12 Engine Oil Temperature Sensor
9.13 Exhaust Manifold Pressure Sensor
9.14 Fuel Rail Pressure Sensor
9.15 Intake Manifold Air Temperature Sensor
9.16 Intake Pressure and Temperature Sensor
9.17 Low Pressure Fuel Sensor
9.18 Supply Fuel Temperature Sensor
9.19 Turbocharger Comrpessor Inlet Temperature Sensor
9.20 Turbocharger Speed Sensor
9.21 Water-in-Fuel Sensor
9.22 Water Pump Speed Sensor
10.1 Front Engine Lifting Bracket
10.2 Front Engine Mount-Radiator Support
10.3 Rear Engine Litfting Brackets
11.1 Accessory Coolant Supply Housing
11.2 Coolant Collector Housing
11.3 Coolant Distributor Housing
11.4 Exhaust Flanged Manifold
11.5 Exhaust Gas Recirculation (EGR) Cooler
11.6 Exhaust Gas Recirculation (EGR) Cooler Outlet Diffusor
11.7 Exhaust Gas Recirculation (EGR) Hot Pipe
11.8 Exhaust Gas Recirculation (EGR) Valve Actuator
11.9 Exhaust Gas Recirculation (EGR) Valve Actuator Coolant Return Line
11.10 Exhaust Gas Recirculation (EGR) Valve Actuator Coolant Supply Line
11.11 Exhaust Gas Recirculation (EGR) Venturi
11.12 Exhaust Manifold Assembly
11.13 Exhaust Manifold Pressure Bracket
11.14 Exhaust Manifold Pressure Tube(s)
11.15 Exhaust System Heat Shields
11.16 Mixer Pipe
12.1 Fuel System General Procedures
12.2 Fuel Prefilter
12.3 Fuel Final Filter
12.4 Fuel Filter Module
12.5 Fuel FIlter Module Return Fitting
12.6 Fuel Filter Module Supply Fitting
12.7 Fuel Filter Module Priming Port Fitting
12.8 Fuel Filter Hand Primer
12.9 Fuel Injectors
12.10 Fuel Injector Cup
12.11 Fuel Pump Lines
12.12 Fuel Rail
12.13 High Pressure Fuel Injector Lines
12.14 High Pressure Fuel Pump
12.15 High Pressure Fuel Pump Drive Gear
12.16 High Pressure Fuel Rail Supply Lines
12.17 Low Pressure Fuel Pump
12.18 Needle and Amplifier Return Lines
12.19 Needle Return Pressure Control Valve
12.20 Pressure Limiting Valve
12.21 Pressure Limiting Valve (PLV) Return Line
12.22 Pressure Relief Valve
12.23 Quantity Control Valve
12.24 Two-Stage Valve
12.25 Water Drain Bowl
12.26 Chassis Fuel Line Bracket
13.1 Lubrication System General Procedures
13.2 Crankcase Breather Assembly
13.3 Crankcase Breather Inlet Pipe Fitting
13.4 Oil Coolant Module
13.5 Oil Cooler
13.6 Oil Dipstick and Tube
13.7 Oil Filler Neck
13.8 Oil Pan
13.9 Oil Pressure Control Valve
13.10 Oil Pump, Oil Suction Manifold and Oil Lines
13.11 Oil Sample Valve
13.12 Oil Thermostat
13.13 Oil Thermostat Cover
Gen 5 DD Platform Electronics and Troubleshooting Manual (DDC-SVC-MAN-0211).pdf (1489 Pages):
1.1 Common Powertrain Controller (CPC5)
2.1 Description and Operation of the 1-BOX Aftertreatment Control Module
2.2 Description and Operation of the Two-BOX (2V2) Aftertreatment Control Module
3.1 Base Engine
3.2 Fuel
3.3 Aftertreatment
3.4 Air Pressure System
4.1 Contaminated Fluids Introduction
4.2 Checking Diesel Exhaust Fluid Quality
4.3 Diesel Exhaust Fluid in Fuel
4.4 Fuel in Coolant/Coolant in Fuel
4.5 Metal in the Fuel System
5.1 Electrical Connector Inspection
5.2 Electrical Connector Repair
6.1 How to Program the IPPC Module Using DiagnosticLink
8.1 Belt Coming Off, Shredding or Misalignment
13.1 Diesel Fuel Contamination in the ATS
13.2 Coolant Contamination in the ATS
13.3 Oil Contamination in the ATS
18.1 Barometric Pressure vs Altitude Chart
18.2 Checking for Low Wheel Horsepower
18.3 Factors That Affect Wheel Horsepower
18.4 Low Power Troubleshooting
20.1 Belt Drive Noise
20.2 Different Engine Noise
20.3 Excessive Overhead Engine Noise
20.4 Gear Train Noise
20.5 Lower End Engine Noise
20.6 Pinging in Fuel System
21.1 Check for Rough Running or Stalling
22.1 Unable to Start a Regeneration
22.2 Unable to Complete a Parked Regeneration
22.3 High Idle Regeneration Initiates - Runs Indefinitely
7.1 Oil at Purge Valve, Dryer Cartridge or Reservoir
7.2 Will Not Build Air Pressure or Slow to Build Air Pressure
9.1 Symptom Diagnostics - Coolant Loss
10.1 Poor Engine Brake Performance
11.1 Diagnosing Front Engine Brake for Regeneration Concerns
12.1 Engine Oil Leaks
14.1 Symptom Diagnostics - Oil Present at the Turbocharger Compressor Housing
15.1 Hard Start/No Start (This Test Must Be Done First)
15.2 Test-A
15.3 Test-B
15.4 Test-C
15.5 Test-D
15.6 Test-E
15.7 Test-E Worksheet
16.1 High Crankcase Pressure
17.1 Symptom Diagnostics - Low Engine Compression
19.1 Excessive Black or Grey Smoke
19.2 Excessive Blue Smoke
19.3 Excessive White Smoke
23.1 Engine Manufacturer Diagnostics Definitions
347.1 Verify Repairs
Gen 5 DD13 Platform Workshop Manual (DDC-SVC-MAN-0213).pdf (634 Pages):
1.1 California Proposition 65 Warning and Engine Idle Notice
1.2 Engine External Views
1.3 Engine Model and Serial Number
1.4 Engine Steam Clean - Enhanced
1.5 Engine Steam Clean - General
1.6 Engine Storage
1.7 General Cleaning and Gasket Preparation Guidelines
1.8 Restoring an Engine to Service After Extended Storage
1.9 Safety Precautions
2.1 Aftertreatment General Procedures
2.2 Aftertreatment System (ATS) Assembly
2.3 Diesel Particulate Filter (DPF)
2.4 DIesel Oxidation Catalyst (DOC)
2.5 Diesel Exhaust Fluid (DEF) Dosing Unit
2.6 Diesel Exhaut Fluid (DEF) Dosing Unit Inlet Screen
2.7 Diesel Exhaust Fluid (DEF) Pump
2.8 Diesel Exhaust Fluid (DEF) Pump Coolant Connector Fitting
2.9 Diesel Exhaust Fluid (DEF) Pump Filter
2.10 Diesel Exhaust Fluid (DEF) Pump Inlet Screen
2.11 Diesel Exhaust Fluid (DEF) Pump Pressure Relief Valve
2.12 Hydrocarbon (HC) Fuel Doser Block
2.13 Hydrocarbon (HC) Fuel Doser Block Supply Line
2.14 Hydrocarbon (HC) Fuel Doser Injector Valve Assembly
2.15 Hydrocarbon (HC) Fuel Doser Injector Valve
2.16 Hydrocarbon (HC) Doser Coolant Supply Line
2.17 Hydrocarbon (HC) Doser Coolant Return Line
2.18 Hydrocarbon (HC) Fuel Doser Supply Line
3.1 Aftertreatment Electrical General Procedures
3.2 Aftertreatment Control Module (ACM)
3.3 Aftertreatment System (ATS) Wiring Harness
3.4 Aftertreatment System (ATS) Delta Pressure Sensor
3.5 Aftertreatment System (ATS) Delta Pressure Sensor Tubes
3.6 Diesel Oxidation Catalyst (DOC) Inlet Temperature Sensor
3.7 Diesel Oxidation Catalyst (DOC) Outlet Temperature Sensor
3.8 Diesel Particulate FIlter (DPF) Outlet Temperature Sensor
3.9 Fuel Compensation Pressure Sensor
3.10 Selective Catalytic Reduction (SCR) Inlet NOx Sensor
3.11 Selective Catalytic Reduction (SCR) Outlet NOx Sensor
3.12 Selective Catalytic Reduction (SCR) Outlet Temperature Sensor
3.13 Soot Sensor
4.1 Air Compressor
4.2 Air Compressor Coolant Supply Line
4.3 Air Compressor Coolant Return Line
4.4 Unloader Valve
5.1 Air Intake Manifold
5.2 Cold Boost Pipe (Charge Air Pipe)
5.3 Intake Mixer Assembly
5.4 Intake Adaptor
5.5 Turbocharger
5.6 Turbocharger Oil Supply Line
5.7 Turbocharger Oil Return Line
6.1 Accessory Mounting Bracket
6.2 Belt Drive Tensioner System
6.3 Idler Pulley and Idler Pulley Bracket
6.4 Non-Bracketed Idler Pulley
6.5 Poly-V-Belts
7.1 Cooling System General Procedures
7.2 Coolant Requirements
7.3 Coolant Inlet Elbow
7.4 Coolant Thermostat
7.5 Fixed Speed Engine Water Pump
7.6 Fixed Speed Engine Water Pump Pulley
7.7 Variable Speed Engine Water Pump
8.1 Engine Mechanical General Procedures
8.2 Engine Replacement Procedures
8.3 Camshafts
8.4 Camshaft Housing
8.5 Crankshaft and Bearings
8.6 Crankshaft Oil Seals
8.7 Cylinder Block
8.8 Cylinder Head and Valves
8.9 Cylinder Liner
8.10 Engine Brakes
8.11 Flywheel Assembly
8.12 Flywheel Housing
8.13 Front Engine Cover
8.14 Gear Train
8.15 Pilot Bearing
8.16 Piston and Connecting Rod Assembly
8.17 Rocker Arms
8.18 Rocker Cover
8.19 Vibration Damper
9.1 Engine Sensor Locations
9.2 Engine Wiring Harness
9.3 Fuel Injector Wiring Harness
9.4 Motor Control Module (MCM)
9.5 Camshaft Position Sensor
9.6 Crankcase Breather Speed Sensor
9.7 Crankshaft Position Sensor
9.8 Delta Pressure Sensor
9.9 Engine Coolant Inlet Temperature Sensor
9.10 Engine Coolant Outlet Temperature Sensor
9.11 Engine Oil Pressure Sensor
9.12 Engine Oil Temperature Sensor
9.13 Exhaust Manifold Pressure Sensor
9.14 Fuel Rail Pressure Sensor
9.15 Intake Manifold Air Temperature Sensor
9.16 Intake Presure/Temperature Sensor
9.17 Low Pressure Fuel Sensor
9.18 Supply Fuel Temperature Sensor
9.19 Turbocharger Compressor Inlet Temperature Sensor
9.20 Turbocharger Speed Sensor
9.21 Water-in-Fuel Sensor
9.22 Water Pump Speed Sensor
10.1 Front Engine Lifting Bracket
10.2 Front Engine Mount/Radiator Support
10.3 Rear Engine Lifting Brackets
11.1 Accessory Coolant Supply Housing
11.2 Coolant Collector Housing
11.3 Coolant Distributor Housing
11.4 Exhaust Flanged Manifold
11.5 Exhaust Gas Recirculation (EGR) Cooler
11.6 Exhaust Gas Recirculation (EGR) Cooler Outlet Diffusor
11.7 Exhaust Gas Flap (EGF) Actuator
11.8 Exhaust Gas Flap (EGF) Actuator Coolant Lines
11.9 Exhaust Gas Flap (EGF) Pull Rod
11.10 Exhaust Gas Recirculation (EGR) Hot Pipe
11.11 Exhaust Gas Recirculation (EGR) Valve
11.12 Exhaust Gas Recirculation (EGR) Valve Actuator
11.13 Exhaust Gas Recirculation (EGR) Valve Actuator Coolant Return Line
11.14 Exhaust Gas Recirculation (EGR) Valve Actuator Coolant Supply Line
11.15 Exhaust Gas Recirculation (EGR) Venturi
11.16 Exhaust Manifold
11.17 Exhaust Manifold Presure Bracket
11.18 Exhaust Manifold Presure Tube(s)
11.19 Exhaust System Heat Shields
11.20 Mixer Pipe
12.1 Fuel System General Procedures
12.2 Fuel Prefilter
12.3 Fuel Final Filter
12.4 Fuel Filter Module
12.5 Fuel Filter Hand Primer
12.6 Fuel Injectors
12.7 Fuel Injector Cup
12.8 Fuel Rail
12.9 High Pressure Fuel Injector Lines
12.10 High Pressure Fuel Pump
12.11 High Pressure Fuel Pump Drive Gear
12.12 High Pressure Fuel Rail Supply Lines
12.13 Low Pressure Fuel Pump
12.14 Low Pressure Fuel Pump Lines
12.15 Needle, Amplifier, and Pressure Limiting Valve Return Lines
12.16 Needle Return Pressure Control Valve
12.17 Pressure Limiting Valve
12.18 Pressure Relief Valve
12.19 Quantity Control Valve
12.20 Two-Stage Valve
12.21 Water Drain Bowl
12.22 Chassis Fuel Line Bracket
13.1 Lubrication System General Procedures
13.2 Crankcase Breather Assembly
13.3 Crankcase Breather Inlet Pipe FItting
13.4 Oil Coolant Module
13.5 Oil Cooler
13.6 Oil Dipstick and Tube
13.7 Oil Filler Neck
13.8 Oil Pan
13.9 Oil Pressure Control Valve
13.10 Oil Pump, Oil Suction Manifold and Oil Lines
13.11 Oil Sample Valve
13.12 Oil Thermostat
13.13 Oil Thermostat Cover
Gen 5 DD15 Platform Workshop Manual (DDC-SVC-MAN-0215).pdf (521 Pages):
1.1 California Proposition 65 Warning and Engine Idle Notice
1.2 Engine External Views
1.3 Engine Model and Serial Number
1.4 Engine Steam Clean - Enhanced
1.5 Engine Steam Clean - General
1.6 Engine Storage
1.7 General Cleaning and Gasket Preparation Guidelines
1.8 Restoring an Engine to Service After Extended Storage
1.9 Safety Precautions
2.1 Aftertreatment General Procedures
2.2 Aftertreatment System (ATS) Assembly
2.3 Diesel Particulate Filter (DPF)
2.4 Diesel Oxidation Catalyst (DOC)
2.5 Diesel Exhaust Fluid (DEF) Dosing Unit
2.6 Diesel Exhaust Fluid (DEF) Dosing Unit Inlet Screen
2.7 Diesel Exhaust Fluid (DEF) Pump
2.8 Diesel Exhaust Fluid (DEF) Pump Coolant Connector Fitting
2.9 Diesel Exhaust Fluid (DEF) Pump Filter
2.10 Diesel Exhaust Fluid (DEF) Pump Inlet Screen
2.11 Diesel Exhaust Fluid (DEF) Pump Pressure Relief Valve
2.12 Hydrocarbon (HC) Fuel Doser Block
2.13 Hydrocarbon (HC) Fuel Doser Block Supply Line
2.14 Hydrocarbon (HC) Fuel Doser Injector Valve Assembly
2.15 Hydrocarbon (HC) Fuel Doser Injector Valve
2.16 Hydrocarbon (HC) Doser Coolant Supply Line
2.17 Hydrocarbon (HC) Doser Coolant Return Line
2.18 Hydrocarbon (HC) Fuel Doser Supply Line
3.1 Aftertreatment Electrical General Procedures
3.2 Aftertreatment Control Module (ACM)
3.3 Aftertreatment System (ATS) Wiring Harness
3.4 Aftertreatment System (ATS) Delta Pressure Sensor
3.5 Aftertreatment System (ATS) Delta Pressure Sensor Tubes
3.6 Diesel Oxidation Catalyst (DOC) Inlet Temperature Sensor
3.7 Diesel Oxidation Catalyst (DOC) Outlet Temperature Sensor
3.8 Diesel Particulate Filter (DPF) Outlet Temperature Sensor
3.9 Fuel Compensation Pressure Sensor
3.10 Selective Catalytic Reduction (SCR) Inlet NOx Sensor
3.11 Selective Catalytic Reduction (SCR) Outlet NOx Sensor
3.12 Selective Catalytic Reduction (SCR) Outlet Temperature Sensor
3.13 Soot Sensor
4.1 Air Compressor
4.2 Air Compressor Coolant Supply Line
4.3 Air Compressor Coolant Return Line
4.4 Unloader Valve
5.1 Air Intake Manifold
5.2 Cold Boost Pipe (Charge Air Pipe)
5.3 Intake Mixer Assembly
5.4 Intake Adaptor
5.5 Turbocharger
5.6 Turbocharger Oil Supply Line
5.7 Turbocharger Oil Return Line
6.1 Accessory Mounting Bracket
6.2 Belt Drive Tensioner System
6.3 Idler Pulley and Idler Pulley Bracket
6.4 Non-Bracketed Idler Pulley
6.5 Poly-V-Belts
7.1 Cooling System General Procedures
7.2 Coolant Requirements
7.3 Coolant Inlet Elbow
7.4 Coolant Thermostat
7.5 Fixed Speed Engine Water Pump
7.6 Fixed Speed Engine Water Pump Pulley
7.7 Variable Speed Engine Water Pump
8.1 Engine Mechanical General Procedures
8.2 Engine Replacement Procedures
8.3 Camshafts
8.4 Camshaft Housing
8.5 Crankshaft and Bearings
8.6 Crankshaft Oil Seals
8.7 Cylinder Block
8.8 Cylinder Block Cover Plate
8.9 Cylinder Head and Valves
8.10 Cylinder Liner
8.11 Engine Brakes
8.12 Flywheel Assembly
8.13 Flywheel Housing
8.14 Front Engine Cover
8.15 Gear Train
8.16 Pilot Bearing
8.17 Piston and Connecting Rod Assembly
8.18 Rocker Arms
8.19 Rocker Cover
8.20 Vibration Damper
9.1 Engine Sensor Locations
9.2 Engine Wiring Harness
9.3 Fuel Injector Wiring Harness
9.4 Motor Control Module (MCM)
9.5 Camshaft Position Sensor
9.6 Crankcase Breather Speed Sensor
9.7 Crankshaft Position Sensor
9.8 Delta Pressure Sensor
9.9 Engine Coolant Inlet Temperature Sensor
9.10 Engine Coolant Outlet Temperature Sensor
9.11 Engine Oil Pressure Sensor
9.12 Engine Oil Temperature Sensor
9.13 Exhaust Manifold Pressure Sensor
9.14 Fuel Rail Pressure Sensor
9.15 Intake Manifold Air Temperature Sensor
9.16 Intake Pressure/Temperature Sensor
9.17 Low Pressure Fuel Sensor
9.18 Supply Fuel Temperature Sensor
9.19 Turbocharger Comrpessor Inlet Temperature Sensor
9.20 Turbocharger Speed Sensor
9.21 Water-in-Fuel Sensor
9.22 Water Pump Speed Sensor
10.1 Front Engine Lifting Bracket
10.2 Front Engine Mount/Radiator Support
10.3 Rear Engine Litfting Brackets
11.1 Accessory Coolant Supply Housing
11.2 Coolant Collector Housing
11.3 Coolant Distributor Housing
11.4 Exhaust Flanged Manifold
11.5 Exhaust Gas Recirculation (EGR) Cooler
11.6 Exhaust Gas Recirculation (EGR) Cooler Outlet Diffusor
11.7 Exhaust Gas Recirculation (EGR) Hot Pipe
11.8 Exhaust Gas Recirculation (EGR) Valve Actuator
11.9 Exhaust Gas Recirculation (EGR) Valve Actuator Coolant Return Line
11.10 Exhaust Gas Recirculation (EGR) Valve Actuator Coolant Supply Line
11.11 Exhaust Gas Recirculation (EGR) Venturi
11.12 Exhaust Manifold
11.13 Exhaust Manifold Pressure Bracket
11.14 Exhaust Manifold Pressure Tube(s)
11.15 Exhaust System Heat Shields
11.16 Mixer Pipe
12.1 Fuel System General Procedures
12.2 Fuel Prefilter
12.3 Fuel Final Filter
12.4 Fuel Filter Module
12.5 Fuel Filter Hand Primer
12.6 Fuel Injectors
12.7 Fuel Injector Cup
12.8 Fuel Rail
12.9 High Pressure Fuel Injector Lines
12.10 High Pressure Fuel Pump
12.11 High Pressure Fuel Pump Drive Gear
12.12 High Pressure Fuel Rail Supply Lines
12.13 Low Pressure Fuel Pump
12.14 Low Pressure Fuel Pump Lines
12.15 Needle, Amplifier, and Pressure Limiting Valve Return Lines
12.16 Needle Return Pressure Control Valve
12.17 Pressure Limiting Valve
12.18 Pressure Relief Valve
12.19 Quantity Control Valve
12.20 Two-Stage Valve
12.21 Water Drain Bowl
12.22 Chassis Fuel Line Bracket
13.1 Lubrication System General Procedures
13.2 Crankcase Breather Assembly
13.3 Crankcase Breather Inlet Pipe Fitting
13.4 Oil Coolant Module
13.5 Oil Cooler
13.6 Oil Dipstick and Tube
13.7 Oil Filler Neck
13.8 Oil Pan
13.9 Oil Pressure Control Valve
13.10 Oil Pump, Oil Suction Manifold and Oil Lines
13.11 Oil Sample Valve
13.12 Oil Thermostat
13.13 Oil Thermostat Cover




