Komatsu HB365LC-3 Field Assembly Instruction GEN00146-04

Komatsu HB365LC-3 Field Assembly Instruction GEN00146-04

Size: 10.3 MB
Machine: Hydraulic Excavator
Machine Model: HB365LC-3
Serial Number: 5001 and up 
Page: 132 Pages
Form Number: GEN00146-04

The Bookmarks of Komatsu HB365LC-3 Hydraulic Excavator Field Assembly Instruction:
Cover
Foreword
Contents
Specifications
Precautions For Field Assembly
Disposal Of Removed Parts
Assembling Procedures, Applicable Equipment And Schedule
Flow Of Field Assembly
Kit Layout Diagram
Transportation
Tool List For Field Assembly
Tightening Torque
Coating Materials
Selection Of Wire Ropes Used For Assembly
Selection Of Nylon Slings Used For Assembly
A. Assembly Of Chassis
   A-1 Installation Of Handrad
   A-2 Installation Of Climbing Grip
   A-3 Installation Of Mirror
B. Assembling Of Work Equipment
   B-1 Installation Of Boom Cylinder
   B-2 Releasing Remaining Pressure In Hydraulic Circuit
   B-3 Installation Of Boom Cylinder Hoses
   B-4 Installation Of Boom Cylinder Top Pin
   B-5 Installation Of Boom Assembly
   B-6 Installation Of Hoses Ftom Chassis Along Top Of Boom
   B-7 Connection Of Boom Cylinder Head
   B-8 Installation Of Arm Assembly
   B-9 Installation Of Bucket Cylinder Hoses Between Boom And Bucket Cylinder
   B-10 Installation Of Bucket
   B-11 Connection Of Work Equipment Grease Piping
   B-12 Connection Of Work Equipment Wiring
   B-13 Greasing After Completion Of Work Equipment
   B-14 Bleeding Air Ftom Work Equipment Circuit
C. Increasing And Decreasing Of Track Frame Gauge,Assembling Of Counterweight
   C-1 Adjustment Of Track Tension
   C-2 Sticking Sheet To Counterweight
   C-3 Installation Of Camera
   C-4 Sticking Sheet To Revolving Frame
   C-5 Installation Of Counterweight
M. Procedure For Inspection And Maintenance Aftercompletion Of Assembly
   M-1 Replacement Of Return Fìlter(Standard Filter To Flushing Filter)
   M-2 Flushing Of Hydraulic Circuit
   M-3 Reolacement Of Return Filter (Flushing Filter To Standard Filter) (1/2)
   M-4 Check Of Oivcoolant Level At Each Part
   M-5 Inspection Of Oil Level In Hydraulic Tank And Refill
   M-6 Parts To Be Touched Up After Field Assembly
   M-7 Error Code
   M-8 Adjust Komvision Camera Angle (Komvision Spec.) (Camera Calibration And 12 M Visibdity Check)
Mounting Bolt Torque Check Sheet
Field Assembly Inspection Report (Backhoe)