Sunward SWE25UF Operation Maintenance Manual

Data Size: 4.32 MB
File Type: PDF
Language: English
Manufacturer: Sunward
Applicable Machine: Hydraulic Excavator
Document: Operation Manual, Maintenance Manual, Electric Schematic, Hydraulic Schematic
Machine Model: Sunward SWE25UF Hydraulic Excavator
Engine: YANMAR 3TNV80f-SPSU
Page: 106 Pages

List Contents:

1. Safety Rules
1.1 Safety Mark 1.2 Safety Label
1.3 General Safety Instruction
1.4 Prepare For Emergencies
1.5 Wear Safety Protective Articles
1.6 Check Machine Before Start-Up
1.7 Adjust Operator Seat
1.8 Enter Or Leave Machine Correctly
1.9 Start Engine Correctly
1.10 Forbid Hitching Other People
1.11 Keep Machine Away From Electricity Transmission Line
1.12 Move Machine Safely
1.13 Prevent Accident While Backing Or Swinging
1.14 Operate Digging Work Safely
1.15 Avoid Accident By Control Failure
1.16 Park Machine Safely
1.17 Safe Maintenance
1.18 Support Machine Correctly
1.19 Clean Trash On The Machine
1.20 Prevent Battery From Exploding
1.21 Store Parts Safely
1.22 Prevent Splashing Objects
1.23 Prevent Parts From Flying Off
1.24 Keep Away From Transmission Parts
1.25 Avoid Inhaling Asbestos Dust
1.26 Beware Of Inhaling Fog Or Exhaust Gas
1.27 Beware Of Scald
1.28 Be Cautious Of Pressure Liquids
1.29 Avoid Heating Up Near Pressure Oil Pipe
1.30 Avoid Heating Up Inflammable Liquid Pipe
1.31 Remove Paint Before Welding Or Heating
1.32 Dispose Of Liquid Safely
1.33 Dispose Of Chemical Safely
1.34 Avoid Fire
1.35 Emergency Exit
1.36 Noise And Vibration
1.37 Other Safety Marks
2. Machine Familiarization
2.1 Position Of The Various Machine Components
2.2 Cabin
2.3 Start-Up Switch
2.4 Monitor Panel
2.5 Wane Control Panel
2.6 Heater
2.6.1 Work Theory
2.6.2 Installation
2.6.3 Operation
2.7 Radio
2.8 Seat Adjustment
2.9 Pilot Safety Lever
2.10 Engine Accelerograph Speed Control Lever
2.11 Pilot Operation
2.12 Open And Close Front Window
2.13 Air Ducting Hood And Upper-Cover
2.14accessory And Tool List
2.15 Identifier
3. Machine Operation
3.1 Machine Working Environment
3.2 Running And Operation
3.3 Operate Engine
3.4 Travel Control
3.4.1 Control Travel With Pedal
3.4.2 Travel With Handle Control
3.4.3 Travel Speed
3.4.4 Travel Brake
3.4.5 Outline Of Travel
3.5 Excavation
3.6 Lift Work
3.7 Hydraulic Breaking Operation
3.8 Boom Swing
4 Maintenance
4.1 Correct Maintenance And Inspection Procedure
4.2 Maintenance Guide
4.2.1 Add Lubricant Grease
4.2.2 Engine Oil
4.2.3 Gear Oil
4.2.4 Fuel System
4.2.5 Hydraulic System
4.2.6 Air Filter
4.2.7 Cooling System
4.2.8 Others
4.2.9 Maintenance In Special Situation
4.2.10 Protection For Long Term Store
4.2.11 Heater Maintenance
5. Transportation And Storage
6. Trouble Shooting
7. Specifications
7.1 Technical Parameter
7.2 Technical Introduction
7.3 Operation Parameter
8. Attachment
8.1 Electric Drawing
8.2 Hydraulic Drawing
8.3 Hydraulic Component List
9. About Manufacturer